Vastaa viestiketjuun

Viesti

<blockquote data-quote="korsteeni" data-source="post: 38986" data-attributes="member: 7022">pari mutkaa softan asennuksessa mutta tässä aamusummppia juodessa se sinne uppositämä python tuntuukin mukavalle tuon c'n jälkeen, pitää testailla enempikinroot@bananapi:/home/bpi/src/mpp-solar# mpp-solar -p /dev/ttyUSB0 -c QPIRICommand: QPIRI - Current Settings inquiry------------------------------------------------------------Parameter&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Value&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Unitac_input_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 230.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vac_input_current&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 23.9&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Aac_output_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 230.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vac_output_frequency&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 50.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Hzac_output_current&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 23.9&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Aac_output_apparent_power&nbsp; &nbsp; &nbsp; &nbsp; 5500&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; VAac_output_active_power&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 5500&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Wbattery_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 48.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Vbattery_recharge_voltage&nbsp; &nbsp; &nbsp; &nbsp; 46.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Vbattery_under_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 40.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Vbattery_bulk_charge_voltage&nbsp; &nbsp;&nbsp; 56.4&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Vbattery_float_charge_voltage&nbsp; &nbsp; 54.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Vbattery_type&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; AGMmax_ac_charging_current&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 30&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Amax_charging_current&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 60&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Ainput_voltage_range&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Applianceoutput_source_priority&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Solar firstcharger_source_priority&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Solar + Utilitymax_parallel_units&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; unitsmachine_type&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Off Gridtopology&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; transformerlessoutput_mode&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; single machine outputbattery_redischarge_voltage&nbsp; &nbsp;&nbsp; 54.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Vpv_ok_condition&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; As long as one unit of inverters has connect PV, parallel system will consider PV OKpv_power_balance&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; PV input max power will be the sum of the max charged power and loads powerroot@bananapi:/home/bpi/src/mpp-solar# mpp-solar -p /dev/ttyUSB0 -c QPIGSCommand: QPIGS - General Status Parameters inquiry------------------------------------------------------------Parameter&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Value&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Unitac_input_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 230.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vac_input_frequency&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 50.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Hzac_output_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 230.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vac_output_frequency&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 50.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Hzac_output_apparent_power&nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; VAac_output_active_power&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Wac_output_load&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; %bus_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 312&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vbattery_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 1.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vbattery_charging_current&nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Abattery_capacity&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; %inverter_heat_sink_temperature&nbsp; 27&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; °Cpv_input_current_for_battery&nbsp; &nbsp; 0.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Apv_input_voltage&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vbattery_voltage_from_scc&nbsp; &nbsp; &nbsp; &nbsp; 0.0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Vbattery_discharge_current&nbsp; &nbsp; &nbsp;&nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Ais_sbu_priority_version_added&nbsp;&nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_configuration_changed&nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_scc_firmware_updated&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_load_on&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_battery_voltage_to_steady_while_charging&nbsp; &nbsp;&nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_charging_on&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_scc_charging_on&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_ac_charging_on&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolrsv1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Arsv2&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Apv_input_power&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Wis_charging_to_float&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_switched_on&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; boolis_reserved&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 0&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; bool</blockquote>

[QUOTE="korsteeni, post: 38986, member: 7022"] pari mutkaa softan asennuksessa mutta tässä aamusummppia juodessa se sinne upposi tämä python tuntuukin mukavalle tuon c'n jälkeen, pitää testailla enempikin root@bananapi:/home/bpi/src/mpp-solar# mpp-solar -p /dev/ttyUSB0 -c QPIRI Command: QPIRI - Current Settings inquiry ------------------------------------------------------------ Parameter Value Unit ac_input_voltage 230.0 V ac_input_current 23.9 A ac_output_voltage 230.0 V ac_output_frequency 50.0 Hz ac_output_current 23.9 A ac_output_apparent_power 5500 VA ac_output_active_power 5500 W battery_voltage 48.0 V battery_recharge_voltage 46.0 V battery_under_voltage 40.0 V battery_bulk_charge_voltage 56.4 V battery_float_charge_voltage 54.0 V battery_type AGM max_ac_charging_current 30 A max_charging_current 60 A input_voltage_range Appliance output_source_priority Solar first charger_source_priority Solar + Utility max_parallel_units 1 units machine_type Off Grid topology transformerless output_mode single machine output battery_redischarge_voltage 54.0 V pv_ok_condition As long as one unit of inverters has connect PV, parallel system will consider PV OK pv_power_balance PV input max power will be the sum of the max charged power and loads power root@bananapi:/home/bpi/src/mpp-solar# mpp-solar -p /dev/ttyUSB0 -c QPIGS Command: QPIGS - General Status Parameters inquiry ------------------------------------------------------------ Parameter Value Unit ac_input_voltage 230.0 V ac_input_frequency 50.0 Hz ac_output_voltage 230.0 V ac_output_frequency 50.0 Hz ac_output_apparent_power 0 VA ac_output_active_power 0 W ac_output_load 0 % bus_voltage 312 V battery_voltage 1.0 V battery_charging_current 0 A battery_capacity 0 % inverter_heat_sink_temperature 27 °C pv_input_current_for_battery 0.0 A pv_input_voltage 0.0 V battery_voltage_from_scc 0.0 V battery_discharge_current 0 A is_sbu_priority_version_added 0 bool is_configuration_changed 0 bool is_scc_firmware_updated 0 bool is_load_on 1 bool is_battery_voltage_to_steady_while_charging 0 bool is_charging_on 0 bool is_scc_charging_on 0 bool is_ac_charging_on 0 bool rsv1 0 A rsv2 0 A pv_input_power 0 W is_charging_to_float 0 bool is_switched_on 1 bool is_reserved 0 bool [/QUOTE]

Varmistus