Valikko
Foorumi
Uudet viestit
Hae sivustolta
Mitä uutta
Uudet viestit
Uudet profiiliviestit
Viime toiminnot
Jäsenet
Tämänhetkiset kävijät
Uudet profiiliviestit
Hae profiiliviesteistä
Kirjaudu sisään
Rekisteröidy
Yleiskatsaus
Haku
Haku
Hae vain otsikoista
Kirjoittaja:
Uudet viestit
Hae sivustolta
Valikko
Kirjaudu sisään
Rekisteröidy
Asenna sovellus
Install
Foorumi
Energiakeskustelu
Aurinkosähkö
aurinkopaneeleiden maadoitus
JavaScript pois käytöstä. Saadaksesi kaiken irti sivustosta, ole hyvä ja salli JavaScriptin käyttö selaimessasi.
Käytät vanhentunutta selainta. Selaimesi ei mahdollisesti näytä tätä tai muita sivustoja oikein. Sinun tulisi päivittää selaimesi tai käyttää
vaihtoehtoista selainta.
.
Vastaa viestiketjuun
Viesti
<blockquote data-quote="vesioinas" data-source="post: 31642" data-attributes="member: 7870"><p>Pitääkö tästä tehdä se johtopäätös, että käyttäjänimi Jussi on tehnyt aikoinaan hieman kyseenalaisia tai jopa laittomia asennuksia? </p><p>Kts. sähköturvallisuuslaki luku 4 pykälät 6 ja 82 https://www.finlex.fi/fi/laki/alkup/2016/20161135#Pidp446904512</p><p></p><p>Tässä esimerkkiskenaario paneelien runko-osien maadoituksesta USAn sähköturvavaatimusten mukaisesti - asiassa ei ole sinänsä minkäänlaista maantieteellistä merkitystä sähköjärjestelmien eroista huolimatta:</p><p>https://www.solarpowerworldonline.com/2015/08/what-is-the-process-of-grounding-and-bonding-a-solar-pv-array/</p><p></p><p>Imagine: the insulation on a PV source circuit wire becomes damaged, and the current-carrying part of the conductor makes contact with a frame or rail, said Brian Mehalic, PV Curriculum Developer and Instructor at Solar Energy International. Now that metal, which is not normally part of the circuit, has potential voltage relative to whichever pole in the DC circuit is not faulted, and may even be carrying current during system operation. This is a dangerous situation, because there is now the possibility of a fire, as well as a shock hazard.</p><p></p><p>Regardless of system voltage, equipment grounding is required on all PV systems. Appropriate bonding and equipment grounding limits the voltage imposed on a system by lightning, line surges and unintentional contact with higher-voltage lines. It also limits the voltage-to-ground that can occur on normally non-current-carrying metal components, ranging from frames and rails to conduit and enclosures.</p><p></p><p>Bonding and grounding PV systems ensures public safety, as well as the safety of PV installers and field electricians, said Andy Zwit, Codes and Standards Manager at ILSCO.</p><p></p><p>En usko, että alalta löytyy ketään vakavasti otettavaa toimijaa, joka suosittelee runkojen maadoituksen/nollauksen tekemättä jättämistä perustelujen kera.</p></blockquote><p></p>
[QUOTE="vesioinas, post: 31642, member: 7870"] Pitääkö tästä tehdä se johtopäätös, että käyttäjänimi Jussi on tehnyt aikoinaan hieman kyseenalaisia tai jopa laittomia asennuksia? Kts. sähköturvallisuuslaki luku 4 pykälät 6 ja 82 https://www.finlex.fi/fi/laki/alkup/2016/20161135#Pidp446904512 Tässä esimerkkiskenaario paneelien runko-osien maadoituksesta USAn sähköturvavaatimusten mukaisesti - asiassa ei ole sinänsä minkäänlaista maantieteellistä merkitystä sähköjärjestelmien eroista huolimatta: https://www.solarpowerworldonline.com/2015/08/what-is-the-process-of-grounding-and-bonding-a-solar-pv-array/ Imagine: the insulation on a PV source circuit wire becomes damaged, and the current-carrying part of the conductor makes contact with a frame or rail, said Brian Mehalic, PV Curriculum Developer and Instructor at Solar Energy International. Now that metal, which is not normally part of the circuit, has potential voltage relative to whichever pole in the DC circuit is not faulted, and may even be carrying current during system operation. This is a dangerous situation, because there is now the possibility of a fire, as well as a shock hazard. Regardless of system voltage, equipment grounding is required on all PV systems. Appropriate bonding and equipment grounding limits the voltage imposed on a system by lightning, line surges and unintentional contact with higher-voltage lines. It also limits the voltage-to-ground that can occur on normally non-current-carrying metal components, ranging from frames and rails to conduit and enclosures. Bonding and grounding PV systems ensures public safety, as well as the safety of PV installers and field electricians, said Andy Zwit, Codes and Standards Manager at ILSCO. En usko, että alalta löytyy ketään vakavasti otettavaa toimijaa, joka suosittelee runkojen maadoituksen/nollauksen tekemättä jättämistä perustelujen kera. [/QUOTE]
Varmistus
Lähetä vastaus
Foorumi
Energiakeskustelu
Aurinkosähkö
aurinkopaneeleiden maadoitus
Käytämme sivuillamme evästeitä voidaksemme tarjota käyttäjille paremman käyttökokemuksen sekä kehittääksemme sivuston toimivuutta.
Jatkamalla sivuston käyttöä, hyväksyt evästeiden käytön.
Hyväksy
Lisätietoja...
Ylös